Identifying The Size Of Paper In The Multifeeder; Detecting The Width Of Paper; Rear/Front Registration; Identifying The Length Of Paper - Canon iR2200 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM

5.2 Identifying the Size of Paper in the Multifeeder

5.2.1 Detecting the Width of Paper

The width of paper is detected by a variable resistor operating in conjunction with the
movement of the slide guide. The slide guide is set when the user adjusts the multifeeder
tray to suit the paper placed on it.

5.2.2 Rear/Front Registration

The rear/front registration of the multifeeder may be adjusted by turning the screw on the
slide guide.

5.2.3 Identifying the Length of Paper

The length of paper is detected with reference to the period of time during which the pre-
registration paper sensor (PS10) remains ON while copies are being made. The maximum
size of paper is 432 × 279 mm (11×17).
Slide guide (rear)
COPIER>ADJUST>CST-ADJ>MF-A4R
Use it to adjust the paper width basic value of A4R paper for the manual
feed tray.
COPIER>ADJUST>CSRT-ADJ>MF-A6R
Use it to adjust the paper width basic value of A6R for the manual feed tray.
COPIER>ADJUST>CST-ADJ>MF-A4
Use it to adjust the paper width basic value of A4 paper for the manual feed
tray.
5-28 P
COPYRIGHT © 2001 CANON INC.
Variable resistor
F05-602-01
Slide guide (front)
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
Multifeeder tray