Parts Replacement Procedure; Transfer Charging Roller; Removing The Transfer Charging Roller - Canon i-SENSYS MF4300dn Service Manual

Chapter 6

6.4 Parts Replacement Procedure

6.4.1 Transfer Charging Roller

6.4.1.1 Removing the Transfer Charging Roller

i-SENSYS MF4300dn / i-SENSYS MF4350d / i-SENSYS MF4380dn / i-
SENSYS MF4310/4318 / i-SENSYS MF4320d / i-SENSYS MF4330d / i-
SENSYS MF4340d / i-SENSYS D450d / i-SENSYS MF4370dn
1) Open the control panel assembly [1].
2) Open the printer cover [2].
3) Unhook the 2 claws [1] and the claw [2] to remove the transfer charging
roller [3] with the transfer guide [4] in the direction of the arrow.
[3] [4]
Do not touch the roller with bare hands.
Points to Note when Attaching
- Insert the spring [1] into the boss [2] of the bushing.
- Push in the transfer guide [3] until it stops.
6-4
[1]
[2]
F-6-3
[2] [1]
F-6-4
0020-2695
4) Remove the transfer charging roller [2] from the transfer guide [1].
[3]
[2]
[1]
F-6-5
[1]
[2]