Making Adjustments; Outline; Envelopes And Type Of Spring; Replacing The Spring - Canon iR2200 Service Manual

5 Making Adjustments

5.1 Outline

If you want to use envelopes with a different configuration in the envelope feeder, you
need to replace the spring to suit the new envelope.
The spring may be painted either green or red; one is already fitted, and the other is ex-
pected to be stored by the user near the host machine.
Be sure to check that the correct spring is fitted whenever you want to switch to envelopes
of a different configuration.

5.1.1 Envelopes and Type of Spring

• Use the green-painted spring for COM10, Monarch, DL, and YOUKEI 4.
• Use the red-painted spring for C5 and B5.

5.2 Replacing the Spring

5.2.1 Replacing the Spring
1) Remove the two mounting screws [1]
each, and detach the side guide plate [2]
(front, rear) and the lifter [3].
2) Holding the bottom (1st, 2nd loops) of
the spring [1], turn it clockwise to free
it from the envelope feeder.
COPYRIGHT © 2001 CANON INC.
CHAPTER 11 ENVELOPE FEEDER ATTACHMENT-B1
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[2] [3]
[1]
F11-502-01
F11-502-02
[2]
[1]
[1]
11-7 P