Orientation Of The Deck Pickup/Feeding Roller; Removing The Deck Separation Roller - Canon iR2200 Service Manual

3.4.5 Orientation of the Deck Pickup/Feeding Roller

When mounting the deck pickup/feeding
roller [1], be sure that the belt pulley [2] is
toward the front of the machine.
The pickup/feeding roller rubber, on the
other hand, may be attached to the pickup/
feeding roller shaft in either orientation.

3.4.6 Removing the Deck Separation Roller

1) Release the deck from its host machine;
then, remove the two screws [1], and
detach the separation roller support
plate [2].
2) Remove the joint [1], and detach the
deck separation roller [2].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 8 PAPER DECK-L1
[2]
F08-304-07
[1]
[2]
F08-304-08
[1]
F08-304-09
[1]
[2]
8-39 P