Settings Of Department Id And User Id Management For The Uniflow Integration - Canon imageRUNNER 2545i Client Manual

Settings of Department ID and User ID Management for
the uniFLOW Integration
Before you use the uniFLOW integration, be sure to set the Department ID and
User ID Management settings as indicated on the table below.
IMPORTANT
• Disable User ID Management before you use the uniFLOW integration.
• The required setting of Department ID Management varies depending on the
authentication modes (authentication to the machine or to the Login and Document
Release function).
Authentication Mode
(See p. EN-3)
Authentication to the
Machine
Authentication to the
Login and Document
Release Function
* User name and password registered in the server, not in the machine for the conventional User ID Management.
NOTE
• To use the department ID and password as the log-in method, register the System
Manager ID and System Manager password (p. EN-6), and department IDs and
passwords in the machine. Setting procedure for registering users is as follows:
- In the machine, register the System Manager ID and System Password for the
System Manager.
- In the machine, register department IDs and passwords for other users (end users).
- On the uniFLOW server, assign the System Manager ID and System Password or a
department ID and password to the System Manager or other users.
- For more information on how to register users in the uniFLOW server, see the
documentation included with the uniFLOW software.
EN-5
Managing the Machine with the uniFLOW Integration
Required Settings of the Management
Modes on the Machine
Log-in Method (See
p. EN-4)
Department ID
Management
User Name and
Password*
PIN Code
ID Card
Department ID and
Password
User Name and
Password*
PIN Code
ID Card
User ID
Management
ON OFF
OFF OFF