Changing The Presser Foot - Husqvarna Viking Designer SE User Manual

Quilter's 1/4" Piecing Foot P
This foot is used when piecing quilt blocks.
The foot has distance marks 1/4" (6 mm) and
1/8" (3 mm).
Embroidery Foot R
This foot is for free motion embroidery/quilting/
stitching and hoop embroidery.
Decorative Side motion Foot S
This foot is used for side-motion/omnimotion
stitches.
Transparent Presser Foot
For decorative sewing. Ma kes it easy to match
patterns. Same shape as presser foot B.
One-Step Sensor Buttonhole Foot
When connected to the machine it gives a
buttonhole length fitting the button size that has
been entered into the machine. The middle mark
gives a 5/8" (15 mm) buttoning edge.
Self-adhesive Glide Plates
Used for the presser foot C/Sensor Buttonhole
Foot when sewing plastic-coated fabrics, leather,
etc.

Changing the Presser Foot

1. Make sure that the needle is in the highest
position. Pull the presser foot towards you.
2. Line up the cross pin on the foot with the
gap in the presser foot ankle.
3. Press back until the foot snaps into place.
Set it Up
P
S
7
R
7
7
1-19