Embroidery Fonts; Create Text With Embroidery Fonts 4-14 - Husqvarna Viking Designer SE User Manual

Embroidery Fonts

Your Designer SE is delivered with 4 embroidery
fonts, Clarendon, Kalligraphia, Meza and Palace
Script, each in three different sizes. Touch
and a drop down menu displays the embroidery
fonts in the " My Fonts" folder below the stitch
fonts. Stitch fonts can also be selected in
Embroidery Mode.
Add additional fonts to "My Fonts" in File
Manager. You can also remove fonts.
You can load embroidery fonts stored in " My
Files" or an external device connected to the
USB port. Touch
Alphabet Menu to open up a load dialogue.
Locate your font, select it and touch
Create fonts from fonts available on your
PC computer with the Husqvarna Viking
software 3D QuickFont, which is included
with your Designer SE.
Create Text with Embroidery Fonts
Select an embroidery font from the drop down
menu by touching it. You can select between
three different sizes for each font, 12 mm,
20 mm and 30 mm. A text editor opens.
Touch the letters in the selection area to enter
text. The text is shown horizontally on the
screen. Use to move the cursor back
and forth in the program.
Add a Letter
To add a letter, move the cursor to where you
wish to add it. Touch the letter you wish to add.
The letter is inserted at the cursor position.
Delete a Letter
There are two buttons for deleting letters. To
delete the letter at the cursor position, touch
To delete all letters in the program, touch
4-14
Embroidery Mode
at the bottom of the
.
.
.