Embroidery Text Control Tab - Husqvarna Viking Designer SE User Manual

Rotation
With your Designer SE you can rotate your designs
in one degree steps. Touch
design(s) clockwise in 90 degree steps, and the + and
− to rotate in single degree steps. Above the buttons
you can see how many degrees you have rotated the
design from its original position.
You can also use the On Screen Design options to
rotate your design (see page 4-9).
Positioning
Place your design anywhere in the embroidery area
using these buttons. Touch the arrows to move your
design. Touch and hold to move in larger steps.
Above the buttons is displayed in millimeters how
much the design has been moved vertically and
horizontally from its original position.
You can also touch and drag your design freely on the
screen. See page 4-9 for an overview of the On Screen
Design options.
Mirroring
mirrors the design side to side.
mirrors the design end to end.

Embroidery Text Control Tab

Program Window
If you have entered a text or stitch program it is
displayed here. Touch
The editor looks different depending on whether the
program you have entered is in embroidery letters,
or stitches. See page 4-14 – 4- 16 on how to edit text
using embroidery fonts and stitch fonts.
If no text is selected,
happens when you touch it.
: If a program includes a font not installed on the
NOTE
Designer SE, a pop up will inform you that you cannot edit
the text. Install the used font.
Text Size Adjustment
Touch − or + in
selected text up to 20% proportionally.
Text Spacing
Touch − or + in
between the letters.
4-6
Embroidery Mode
to rotate selected
to open the program editor.
is deactivated and nothing
to reduce or enlarge the
to adjust the space
Program window
Text size
Text spacing