Select A Stitch; Scroll Through Menus; Scale To Fit - Husqvarna Viking Designer SE User Manual

Sewing Mode
Load Stitch Program from Other Location
Load stitch programs that you have saved in
" My Files" or in another location. Touch
at the bottom of the Stitch Menu drop down
menu. A Load dialogue opens. Locate your
stitch program, select it and touch . The
dialogue closes and the loaded stitch program
is displayed to the left. For programming and
saving programs, see pages 2-10 - 2-15.

Select a Stitch

When a stitch menu is selected, all stitches in
that menu are shown in the stitch selection
area. Simply select a stitch by touching it.
Your Designer SE confi rms your choice by
highlighting the selected stitch in white. The
selected stitch is displayed in actual size to
the left, with the recommended presser foot,
needle, and if appropriate, recommendations for
stabilizer and glide plates.
If you want tips and information about each
stitch, use the Quick Help .

Scroll through Menus

To scroll through all available stitches, menu
by menu, forward and backward, use
below the stitches. The on screen text
description of each menu can be turned off and
on in the Set Menu (see page 1-27).

Scale to Fit

If the selected stitch is too wide to be shown in
actual size in the stitch display area, only part
of the stitch is displayed. A button for scaling
appears, . Touch to scale the stitch to fi t
into the stitch display area. The picture of the
presser foot will change size to show that the
stitch image is scaled down.
2-5