Table of Contents
Advertisement
Sewing Mode
Stitch Density
Satin and Scallop Stitches
When certain satin or scallop stitches are
selected, a button for adjusting stitch density
appears. Stitch Density adjusts the density
(closeness of the satin stitches that make up
the complete stitch) of satin type Pictogram
elements and satin decorative stitches without
changing the length of the actual complete stitch
(Pictogram element or satin decorative stitch).
Use with specialty threads and when a less
dense satin stitch is desired.
Touch + to lengthen each individual stitch which
decreases density. Touch − to shorten each stitch
which increases density.
Stitch density +
−
Stitch density
Balance
Omnimotion Stitches
When an Omnimotion stitch (menu K) is
selected, a button for adjusting the balance
appears. See Set menu, page 1-28, for
information about how to adjust the balance.
4-Way and 8-Way Stitches
The stitches on the S- and T-Menu can be sewn
in different directions. A button for changing
direction is located below the stitch picture.
S-Menu
Touch
to change sewing direction 90
degrees clockwise.
button above the needle has the same
function.
2-8
Advertisement
Table of Contents
