Husqvarna Viking Designer SE User Manual page 40

: Mirror stitches side to side with
MIRRORING
and end to end with
: Decrease or increase the
STITCH LENGTH
stitch length using the − and +.
STITCH WIDTH
stitch width using the − and +.
NEEDLE POSITION
by touching − and right by touching +.
: Touch + to lengthen each
STITCH DENSITY
individual stitch which decreases density.
Touch − to shorten each stitch which
increases density.
Duplicate Stitch
You can program an adjusted stitch several times
in a row, without having to make the same
adjustments on each stitch, with the duplicate
function. To duplicate a programmed and
adjusted stitch, touch
stitch is duplicated.
Preview
View your stitch program horizontally by touching
. A pop-up displays your program in actual
size. If the program is too long to be shown in
total, use the cursor arrows to scroll through the
program. To view the whole program, touch
. Touch to close the preview.
Adjust Whole Program
To adjust the whole program, return to the stitch
view by touching
will affect the whole program.
2-12
.
: Decrease or increase the
: Move the needle left
and the highlighted
. Adjustments made here
Sewing Mode