Husqvarna Viking Designer SE User Manual page 27

Alarm Repeat
When active, the beep signal for an alarm pop-up
is repeated in an interval until it is cancelled.
Text
Set to bring up text descriptions for the selected
fabric and technique in the Sewing Advisor and the
stitch menus.
Owner Name
Enter your name to give your Designer SE a
personal touch.
Language
Opens a list for changing the language of all texts
in your Designer SE. Simply touch a language to
select it.
SE! Light
Adjust the brightness and the color temperature of
the lights on your Designer SE to make it perfect
for all types of fabric and the light conditions in
your sewing room.
Touch Screen Adjust
If you touch a function tab or stitch picture on the
Interactive Designer Screen but it does not respond or
the function next to it is activated instead, the screen
needs to be calibrated. The Interactive Designer
Screen is calibrated at the Husqvarna Viking
factory, but the settings may be affected when the
machine is shipped and transported. You only need
to calibrate the screen if there is a precision problem
when touching the function tabs or stitch pictures.
Touch next to "Touch screen adjust" to open
a special screen for Interactive Designer Screen
calibration.
1. Touch in the center of the cross in the upper
left corner of the screen. This is best done with
a pointed but not sharp object (for in stan ce, the
stylus). The cross disappears and a new cross
appears.
2. Repeat the above for each cross that appears on
screen. Be sure to touch the center of each cross.
Contrast
Touch + or − to adjust the contrast of the
Interactive Designer Screen. The value is displayed
next to the − button. The setting is stored even
when the machine is turned off.
Set it Up
: When calibrating the screen, be sure to
NOTE
touch the cross areas only, as recommended.
If other areas are touched, the screen can be
miscalibrated. A mis ca li bra ted screen may require
an adjustment by an authorized technician.
1-27