Table of Contents
Advertisement
Needle Threader
The needle must be in the up position to use
the built-in needle threader. We also recommend
lowering the presser foot. Touch
.
1. Use the handle to pull the needle threader all
the way down, catching the thread under the
guide (a).
2. Push back to bring the needle threader
forward until the metal fl anges cover the
needle. A small hook will pass through the
needle eye (b).
3. Place the thread under the fl anges in front
of the needle, so the thread catches into the
small hook (c).
4. Let the needle threader gently swing back.
The hook pulls the thread through the
needle eye and forms a loop behind the
needle. Pull the thread loop out behind the
needle.
5. Place the thread under the presser foot and
cut the thread.
: The needle threader is designed to be used
NOTE
for size 70-120 needles. You cannot use the needle
threader for size 60 needles or smaller, the wing
needle, twin needle, triple needle or when the
Sensor Buttonhole Foot is on. There are also some
optional accessories that require manual threading of
the needle.
When threading the needle manually make sure that
the needle is threaded from front to back. The white
presser foot ankle makes it easy to see the eye of
the needle. The bobbin case cover can be used as a
magnifying glass.
Thread Sensor
If the upper thread breaks or bobbin thread runs
out, the machine stops and a pop-up appears
on the screen. If upper thread breaks: Re-thread
the machine and touch
The pop-up disappears. If bob bin thread runs
out: Replace with a wound bobbin and continue
sewing.
1-12
Set it Up
and
on the pop-up.
1.
a
3.
c
4.
5.
2.
b
Advertisement
Table of Contents
