Embroider Stitches And Stitch Fonts - Husqvarna Viking Designer SE User Manual

Embroider Stitches and Stitch Fonts

In Embroidery Mode stitch programs can be
sewn in the hoop. Touch
menu or touch and select a stitch font. A
window for programming opens.
Add, change and delete letters and stitches in
the same way as described on the previous
pages. The length of the program in millimeters
is displayed at the bottom of the window.
: To embroider a previously created stitch
NOTE
program stored in "My Files", touch
at the bottom of the menu. Touch
Files", locate the stitch program, select it and touch
. The program opens in the stitch program
window. You can also load a stitch or program from
the U-menu.
Adjust Stitches in Program
To adjust stitches in the program, move the
cursor back and forth stitch by stitch using
and . When the cursor is positioned at the
very end of the program,
. Touch to quickly move the cursor to
the beginning of the program.
symbol . Touch
the end of the program.
A stitch is adjustable when it is highlighted in
red. Use the mirroring, stitch length and stitch
width buttons to adjust the stitch. Only the
stitch highlighted in red will be affected by the
adjustments.
: Mirror stitches side to side with
MIRRORING
and end to end with
: Decrease or increase the
STITCH LENGTH
stitch length using the − and +.
: Decrease or increase the
STITCH WIDTH
stitch width using the − and +.
STITCH POSITION
touching − and right by touching +.
: Touch + to lengthen each
STITCH DENSITY
individual stitch which decreases density.
Touch − to shorten each stitch which
increases density.
4-16
Embroidery Mode
and select a stitch
and then
for "My
has the symbol
now has the
to move the cursor to
.
: Move the stitch left by