On Screen Design Options - Husqvarna Viking Designer SE User Manual

On Screen Design Options

With the On Screen Design options you can
touch and drag your designs on the Interactive
Designer screen.
There are two ways to select a design, touch
or touch design on screen (see page 4-4).
Select and Position
Touch to activate the function. Select a design by
touching it. Touch and drag the selected design
anywhere in the embroidery area. Fine tune the
position with the positioning arrows (see page
4-6).
Select and Scale
Touch to activate the function. Select a design
by touching it. Touch and scale the design by
20% by moving the stylus on the screen. Fine
tune with the scaling buttons (see page 4-5).
Select and Rotate
Touch to activate the function. Select a design.
Touch and rotate the design by moving the
stylus on the screen. Fine tune with the rotate
button (see page 4-6).
Pan Area
Touch to activate the function. Touch and drag
to pan the embroidery area in the zoomed view.
Zoom to Full Hoop
Touch to display the whole hoop area on the
screen.
Zoom to Show All
Touch to display all loaded designs on the
screen.
Zoom In and Zoom Out
Zoom in and out of the embroidery area.
Embroidery Mode
4-9