First Time Printing; Overview Of Steps; Step 1: Loading Media And Specifying Print Area - Roland VersaUV LEF-12 First Step Manual

First Time Printing

Overview of Steps

Test Print
STEP 1
STEP 2
First, start by performing a test print. Then, print using the actual media that you want to try to print on.
The ingredients in white ink tend to settle. Each day, before starting the day's operations, be sure to
carry out the following steps. Allowing the ink to stand without carrying out these steps can cause
the settled material to harden, resulting in malfunction or other problems.
 Remove just the white ink cartridges, shake them gently, then reinsert them.
 The cyan, magenta, yellow, black, and gloss ink cartridges do not need to be shaken every day,
but new cartridges for these colors should be shaken when you install them.

STEP 1: Loading Media and Specifying Print Area

Usable Media
Maximum size: Width 335 mm (13.19 in) x length 310 mm (12.21 in) x height 100 mm (3.94 in)
Maximum Weight of Media: 5 Kg (11.02 lbs)
Start Production
Print
STEP 3
* In Step 3, perform task
starting from Step 1.
37