Replacing The Ddr3 Compute Book Cover - IBM System x3850 X6 Installation And Service Manual

6. Lift the cover off and set it aside.

Replacing the DDR3 compute book cover

This information provides instructions on how to replace the DDR3 compute book
covers.
About this task
The DDR3 compute book has a cover on the left side and a cover on the right side
for access to the microprocessor and DIMMs. Use the same procedure to remove
both covers.
To access the microprocessor and DIMMs 1 through 12, remove the left cover.
To access DIMMs 13 through 24, remove the right cover.
To replace the DDR3 compute book covers, complete the following steps:
Procedure
1. Align the cover on the rear of the DDR3 compute book and slide it toward the
2. Reinstall the compute book into the server.
3. Rotate the cam handle all the way up until it locks in place.
4. Reconnect the power cord and any cables that you removed.
5. Turn on the peripheral devices and the server.
220
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide
front of the compute book until it is secure.
Compute book
cover
DDR3 Compute book
Microprocessor
heatsink