Replacing An Ml2 (Ethernet) Adapter - IBM System x3850 X6 Installation And Service Manual

Replacing an ML2 (Ethernet) adapter

Use this information for instructions on how to remove an ML2 (Ethernet) adapter.
About this task
The following are illustrations of the ML2 (Ethernet) adapters that the server
supports. See "Supported ML2 (Ethernet) adapters" on page 89 for more
information about the supported Ethernet adapters.
Note: You must go to the IBM Support web site at http://www.ibm.com/
supportportal/ and download the latest device drivers for the ML2 Ethernet
adapters. Look for the Ethernet adapters under NIC adapters. Use the release notes
and read.txt files for the device driver installation instructions.
The following is an illustration of the Intel I350-T4 ML2 Quad-port 1 Gb-T Ethernet
Adapter for IBM System x:
Intel I350-T4 ML2
Quad-port 1 Gb-T
Ethernet adapter
Port 1
Port 2
Link LEDs
Port 3
Port 4
The following is an illustration of the Intel x540 ML2 Dual-port 10 Gb-T Ethernet
Adapter for IBM System x:
Activity LEDs
Chapter 6. Removing and replacing components
255