Installing A Ddr3 Compute Book - IBM System x3850 X6 Installation And Service Manual

11. Reinstall the DDR3 compute book into the server (see "Replacing a DDR3
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 119.

Installing a DDR3 compute book

This information provides notes and information that you need to consider when
you install the DDR3 compute book and the instructions for how to install the
compute book.
About this task
The following are notes and information that you must consider when you install
the DDR3 compute book in the server:
Note: The information and installation procedures in this documentation apply to
both the 4-socket and the 8-socket configurations of the server, unless otherwise
specified. Most of the illustrations in the documentation show the 4-socket
configuration of the server.
v The DDR3 compute books should be installed from left to right (facing the front
v A minimum of two DDR3 compute books must be installed in the 4-socket
66
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide
compute book" on page 284).
of the server).
(x3850 X6) server.
Compute book
cover
DDR3 Compute book
Microprocessor
heatsink