Connection Guide; Connecting The Monitor; Video Inputs And Looping Outputs; Connecting To A Network - Honeywell HRDP H.264 Rev B User Manual

Connection Guide

Connecting the Monitor

Video Inputs and Looping Outputs

Connecting to a Network

Connecting Audio

______________________________________________________________________________________________
Document 800-06801 Rev F
02/13
These monitor outputs are available for the HRDP H.264 Rev B recorder.
•
Composite Monitor output for CCTV monitor – BNC (Marked MAIN)
•
Spot monitor output for CCTV monitor – BNC (Marked SPOT)
• VGA output for VGA monitor – Mini-Sub D15
The HRDP comes with 4/8/16 BNC video inputs on the rear of its chassis.
Each video input has a corresponding looping BNC output for passing the
video signal to another monitoring/recording device.
Use the RJ45 jack on the rear of the DVR when connecting to a network.
To record audio on the DVR connect the audio source to the connections on
the audio ports on the back of the DVR.
To listen to live or recorded audio connect the Audio Out Port to an amplified
speaker system.
Note The DVR audio output is a line level source which requires an
amplified speaker system. The audio input can be from an amplified
source or line level microphone.
HRDP H.264 Rev B DVR User Guide
25