User Management; Add A New User - Honeywell FUSION III DVR User Manual

User Management

Enable Auto Log Off

Add a New User

________________________________________________________________________________________________________
Document 900.0803 Rev 8b
09/09
The User Management Console has options for creating, editing, and deleting user
accounts. Each user account can be assigned different privileges that limit their usage
of the DVR system. Users can be given administrator privileges by enabling all rights,
however only the true Administrator account can log into the User Management
Console.
1. Click the Administration Setup tab.
Click the User Management button.
2.
3. Click Add User to open the User Management
window.
4. Enter the Administrator password and click OK
Enter a user name and password
5.
6. Select appropriate permissions
Select cameras and audio channels to be
7.
hidden from the user
8. Assign a user rank.
9. Click OK to save and exit.
Every DVR comes with an Administrative account and Default account
Note
loaded on them. The Default account should not be used as the primary
account. If the DVR is re-started, the Default account will automatically be
loaded. For applications where maximum security is essential, Honeywell
recommends that all privileges be stripped from the Default user account
and all cameras be set to Hidden.
Fusion III DVR User Guide
Log Off User After x Minute(s) of Inactivity*
*Auto Log Off affects all users
75