Electrical - GBC Orca 1600 Operation And Maintenance Manual

Specifications
Section 3.4 Electrical
United States and Canada:
Europe:
B.T.U. output:
Heater wattages:
Amperage draw:
D/C voltage used:
A/C voltage used:
AIR
Compressor requirements:
Page 3 - 4
Orca 1600 Operation and Maintenance Manual
• 230 - 240 VAC, 50/60 Hz, single phase, 55 amps.
• 230 - 240 VAC, Wye 3 phase, 25 amps/ phase
• 34,120 B.T.U. / hour
• 5000 watts per heater
• No heat, motor only : 1 - 3 amps
• Top heat and motor : 20 - 23 amps
• Both heat and motor : 40 - 43 amps
• 24 vdc
• 230 vac ( minimum )
• Filtered air at 2 cubic feet per minute ( cfm ), 50 liters/
minute at a pressure of 70 pounds per square inch ( psi )
( 500 kPa ).
© GBC Films Group February 2001