GBC Orca 1600 Operation And Maintenance Manual page 17

Safety
T he O rca 1600 L am inator is a large and
heavy piece of equipm ent. It is necessary to
em ploy L IC E N SE D R IG G E R S O N L Y to
m ove the lam inator. T he lam inator is not
designed to be tipped up or sidew ays in any
w ay. Such action disturbs the exact
alignm ent of the rolling parts of the m achine
and requires extensive realignm ent. Y ou can
be crushed or seriously injured.
INFORMATION
A L L S H I P M E N T S A R E E X - W O R K S . At our
dock, title passes to the buyer. Please review
your insurance coverage prior to shipment,
as you are responsible for all subsequent
freight charges and risks.
INFORMATION
Before signing the Bill of Lading, you
should be sure to inspect the crate
and / or pallet for signs of damage or
missing items; if applicable, make
note of this on the Bill of Lading.
The unpacking process requires at least two
people. You can be severely injured, crushed
or cause damage to the laminator.
Page 1 - 6
W A R N IN G
WARNING
Orca 1600 Operation and Maintenance Manual
Depending on the destination and customer
preference, your machine may be shipped in
various ways. The laminator may arrive
shrink wrapped or in a plywood crate on a
skid. Please follow the unpacking procedure
that pertains to your method of shipment.
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
Do not attempt to move the laminator across
anything other than a flat level surface
without trained and qualified riggers. You
can be crushed or seriously injured.
GBC Film Group's warranty does not
cover malfunction of the equipment due to
mishandling and / or tipping. GBC Films
Group bears no responsibility for personal
injury or damage due to moving the
laminator improperly.
© GBC Films Group February 2001
INFORMATION
CAUTION
WARNING
INFORMATION