In Case Of An Emergency - GBC Orca 1600 Operation And Maintenance Manual

Orca 1600 Operation and Maintenance Manual

5.5 In case of an emergency

Four E-STOP buttons, two located on the left
and right side from the front operating position and
two located on the left and right side from the rear
operating position. In the event you are unable to reach
an E-STOP, a front and rear E-CABLE is installed
for your safety.
R e a r E -S T O P R e a r E -C A B L E
F ro n t E -S T O P F ro n t E -C A B L E
a) Press in on any one of the four E-STOP buttons
or press using your foot on either E-CABLE
in the event of an emergency situation.
IN F O R M AT IO N
W hen a safety feature is engaged, the
upper rollers raise and pow er to
the drive m otor is rem oved.
© GBC Films Group February 2001
R e a r E -S T O P
F ro n t E -S T O P
P u s h
b) Resolve the emergency situation.
c) If an E-STOP was depressed, turn the knob
counter clockwise to disengage the E-STOP
button. If an E-CABLE was pressed, continue
with next step.
d) On the front control panel, press the main roller
UP/ DOWN switch to the UP position.
P R E S SU R E
50
40
60
30
70
20
80
10
A D J
90
0
100
P .S .I.
IN F O R M AT IO N
T he upper m ain roller U P/ D O W N sw itch
resets the m ain roller to the correct position.
d) Resume running the laminator.
Operations
T u rn
R O LL
Page 5 - 9