GBC Orca 1600 Operation And Maintenance Manual page 42

Orca 1600 Operation and Maintenance Manual
Figure 4.5.1 Disassembling of the crate
3
4
4.5.2 The shrink wrap
a) Gently unwrap the shrink wrap from around the
laminator.
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
b) Move all packing materials to a safe distance.
© GBC Films Group February 2001
1
5
CAUTION
4.5.3 Moving the laminator
a) Have the laminator removed off of the skid one of
two methods:
1) Rolled off the skid and placed on the floor by
licensed riggers using the included ramps. The
ramps must be secured utilizing screws
removed from the disassembled crate.
2
Do not attempt to use the ramps if they are
not secured to the pallet. Ensure the pallet is
on a flat even surface before attempting to
roll the machine off.
2) Lifted off of the skid with a forklift by positioning
the forks where indicated by fork lift decals
located on the tie bars on the machine.
Installation
WARNING
Page 4 - 7