GBC Orca 1600 Operation And Maintenance Manual page 66

Orca 1600 Operation and Maintenance Manual
6.4 Charts and diagrams
Process control charts allow you to record the
way you thread film through the machine's rolls and idlers
(called webbing) and the control settings for each prod-
uct and process. Process control charts are an excellent
tool for training new operators. They provide a "road
map" for correct machine setup and operation.
This section contains a blank process control chart
and diagram for the ORCA 1600 as well as completed
charts for the basic operations of the laminator. The pro-
cess control charts should be kept in this manual or in a
book close to the laminator.
The Orca 1600 laminators respond in a very ac-
curate and repeatable manner. The charts provide a way
to set up each time, every time for repeatable perfor-
mance by assuring that all controls are set to optimum.
The completed process control charts included
in this section are based on GBC films, GBC boards and
typical prints. Charts and diagrams start on page 6-5.
© GBC Films Group February 2001
Applications
Page 6 - 5