GBC Orca 1600 Operation And Maintenance Manual page 18

Orca 1600 Operation and Maintenance Manual
Do not allow the top to fall into the crate. It
can damage the laminator.
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the laminator into position or you can
become injured if stepped on.
A second person must support the side
labeled 5 in Figure 4.5.1 It can fall and
damage the laminator or cause harm to you
and others.
Do not attempt to use the ramps if they are
not secured to the pallet. Ensure the pallet is
on a flat even surface before attempting to
roll the machine off.
© GBC Films Group February 2001
CAUTION
CAUTION
WARNING
INFORMATION
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
IN F O R M AT IO N
E nsure sufficient space for opening of the
cabinets for m aintenance and servicing.
ELECTRICAL
Only a qualified electrician should connect
power to the laminator. You can be severely
shocked, electrocuted or cause a fire if
power is improperly applied.
E L E C T R IC AL
O nly a qualified electrician should verify
the voltage. Y ou can be severely shocked,
electrocuted or cause a fire.
Safety
S H O C K
S H O C K
Page 1 - 7