Leveling - GBC Orca 1600 Operation And Maintenance Manual

Orca 1600 Operation and Maintenance Manual

4.10 Leveling

Leveling of the machine is an important step in
assuring that the equipment will run at it's optimal speed
and capabilities with little adjustments as possible.
a) Use the foot bolt to raise/ lower the machine so
that the bubble in the leveler is centered.
C enter the bubble
1/2 in.
W rench
b) Place the leveler on the lower front tie bar and
level the machine from left to right.
P la c e le v e l h e re
© GBC Films Group February 2001
c) Place the leveler on the control side frame, not
the top of the cabinet, and level the machine from
front to rear.
e) Do the same for the drive side.
f) Place the leveler on the lower rear tie bar and
level the machine from left to right.
g) Verify all sides to confirm that the machine is level.
Installation
P la c e le v el h e re
P lace lev el h ere
Page 4 - 13