GBC Orca 1600 Operation And Maintenance Manual page 83

Troubleshooting
Problem: Straight waves in the output
Hints: • Check operational settings for materials
being used.
• Check clutch pressure.
Problem: Waves on only one side of the output
Hints: • Check the nip setting of main rollers
• Check the nip setting of pull rollers
• Check for even paper tension
Page 7 - 2
Orca 1600 Operation and Maintenance Manual
Problem: Angled waves in the output on both sides
Hints: • Check for insufficient main roller pressure
• Check for insufficient pull roller pressure
• Check the main roller nip settings
• Check the pull roller nip settings
Problem: Indent waves in output after the pull rollers
Hints: • Insufficient cooling time
• Allow output to cool before handling
• Check operating temperatures of material
© GBC Films Group February 2001