GBC Orca 1600 Operation And Maintenance Manual page 43

Installation
b) Remove any plastic strapping and/or packing
paper taped to the rollers.
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
c) Remove all packing materials to a safe distance
from the laminator and dispose of properly.
INFORMATION
About recycling: The crate components can
be reused for shipping the laminator again
or can be disassembled and the wood and
screws recycled. The shrink wrap is not
recyclable, so it must be discarded.
d) Use two people to carefully roll the laminator to
the desired location.
D o not attem pt to m ove the lam inator across
anything other than a flat level surface
w ithout trained and qualified riggers. Y ou
can be crushed or seriously injured.
Page 4 - 8
CAUTION
W AR N IN G
Orca 1600 Operation and Maintenance Manual
e) Consider the following when determining where
to locate your machine;
T he operating environm ent m ust be free of
dust, flam m able liquids and vapors. Y ou can
be injured by inhaling chem ical vapors.
V apor build up or stored flam m able liquids
can cause a fire. E xcessive dust can dam age
the lam inator.
D o not locate the lam inator w here air is
blow ing directly on the m achine. T he air
flow can cool the rolls unevenly and result in
poor quality output.
E nsure sufficient space for opening of the
cabinets for m aintenance and servicing.
© GBC Films Group February 2001
W AR N IN G
W AR N IN G
C AU T IO N
IN F O R M AT IO N