Wiring And Installation - Bosch AMAX panel 4000 Installation Manual

12 en | Optional Modules and Peripheral Devices
13
14
15
16
Table 5.1: Keypad Address Settings
IUI-AMAX-LED8 and IUI-AMAX-LCD8 keypads can only be set to address 1 or address 2 through
the address jumper.
–
–
Address 1
Address 2
Table 5.2: Keypad Jumper Settings
See also
–
5.1.3

Wiring and Installation

Connect the keypad to the bus of the alarm control panel. See , page 13
–
–
–
–
2013.07 | 03 | F.01U.267.112
On
Off
On
Off
Jumper not short-circuited: Address 1.
Jumper short-circuited: Address 2.
Keypad Address Settings, page 11
R: provides 12V power supply for the keypad and other devices.
B: ground conductor.
G: for the alarm control panel to transmit data to external devices.
Y: for external devices to transmit data to the alarm control panel.
Off On
On On
On On
Off Off
Jumper not short-circuited:
Jumper short-circuited (both metal pins are covered)
Installation Guide
AMAX panel 4000 / AMAX panel 4000
On Off Off
On Off Off
On Off Off
Off On Off
Bosch Sicherheitsysteme GmbH
EN