System Overview; Communication; Zones; Tamper Description - Bosch AMAX panel 4000 Installation Manual

Icp-amax4-p1 / icp-amax4-p2-en / icp-amax-p3-en
Hide thumbs Also See for AMAX panel 4000:
Table of Contents

Advertisement

10
en | System overview
4

System overview

4.1

Communication

The AMAX panel 4000 transmits reports with Contact ID and SIA, also supports domestic call.
With additional modules B426 and/or DX4020G Conettix IP via Ethernet or GPRS is supported
as well as dual IP communication. AMAX panel 4000 supports remote programming and
system control by using remote programming software A-LINK PLUS.
4.2

Zones

The alarm control panel supports up to 64 zones, including 16 on-board zones and up to 48
zones increased with upto six DX2010 input expansion modules or wireless devices.
4.3

Tamper Description

The main board is equipped with a separate input for an enclosure tamper contact, not
belonging to the 16 on-board zones.
4.4

Area

The system supports up to 16 independent areas. Area 1 can be used as a common area.
4.5

User

The alarm control panel supports up to 64 independent users. User Code and authority can be
specified for each user.
When using RF up to 128 Keyfobs are possible, representing 128 additional users.
4.6

Programmable Output

The alarm control panel supports up to 20 programmable outputs, including 4 on-board
outputs and up to 16 external outputs using two DX3010 output modules.
4.7

Key Switch

The system can be armed / disarmed with toggle key switch and on/off key switch.
Key Switches are connected to onboard or extension module zone inputs.
4.8

Event Log

AMAX panel 4000 stores events in its non volatile memory. Even if the alarm control panel
does not transmit related event report, the event will be maintained. The events in history can
be directly inquired through the keypad or uploaded to the remote programming software.
AMAX panel 4000 stores the following lists of events:
Event log
All event log
EN event log
Dialer event log
4.9

Keypads

The keypad and the document attached to the alarm control panel further simplify the
installation and operation of the alarm control panel.
2013.07 | 03 | F.01U.267.112
Event quantity
254
254
254
Installation Guide
AMAX panel 4000 / AMAX panel 4000
Event type
All events
EN events
Dialer events
Bosch Sicherheitsysteme GmbH
EN

Advertisement

Table of Contents
loading

Table of Contents