Changing User Detection Settings - Polycom WX 1500 User Manual

Polycom VVX 1500 Business Media Phone User Guide
To change timeouts:
1 Tap
> Settings > Basic > Power Saving > Timeouts.
2 From the Timeouts screen, do the following:

For the Office Hours Idle Timeout field, enter the number of minutes the phone should wait
after being idle (during office hours) before starting power-saving mode.
You can enter a number between 1 minute and 600 minutes. The default is 10 minutes.

Tap Off Hours Idle Timeout, and then enter the number of minutes the phone should wait after
being idle (during off-hours) before starting power-saving mode.
You can enter a number between 1 minute and 10 minutes. The default is 1 minute.

Tap User Input Idle Timeout, and then enter the number of minutes the phone should wait
after being idle after a key press (during office hours or off-hours) before starting power-saving
mode.
You can enter a number between 1 minute and 10 minutes. The default is 10 minutes.
3 Tap the Save soft key.

Changing User Detection Settings

You can specify how sensitive the camera should be at detecting motion. If the camera detects motion
(for example, if you're near the phone), your phone will not initiate power-saving mode, even if an idle
timeout has been reached.
If the camera detects motion, power-saving mode will terminate and the idle screen will display. If the
camera sensitivity is high (five or higher), the phone will display the idle screen when you're near the
phone. If the camera sensitivity is low (between one and four), you will have to wave your hand at the
camera for the idle screen to display. By default, camera sensitivity is set higher during office hours. If you
want, you can disable the user detection feature altogether.
Note: You Camera Detects Different Types of Motion
The camera will detect any source of motion in front of it, not just a person or people nearby. For
example, the camera will detect flying objects or rapidly-changing light conditions. Therefore, even if
you're away from the phone, your phone may detect other sources of motion, and won't initiate
power-saving mode.
In addition, since your phone's camera detects motion, if you close the camera shutter, point the
camera at the ceiling, or set the camera sensitivity to 0, the phone will not detect your presence
(even if you're nearby).
To change user detection settings:
4 Tap
> Settings > Basic > Power Saving > User Detection.
5 From the User Detection screen, do the following:

For the Office Hours Sensitivity field, enter how sensitive you want the camera to be while
you're in your office.
Polycom, Inc.
Version 5.0.0
140