Changing Ring Settings; Default Profile Settings - Polycom SpectraLink 8020 User Manual

Changing Ring Settings

To change the ring tone or any other ring setting for any profile, go to
User Profiles
and select the profile. Select
Telephone
for standard phone calls or one of the
messages. Then select the ring option you want to adjust. See page 24
for the diagram that shows this sequence graphically.

Default Profile Settings

Setting/Profile
Ring Cadence
Ring Tone
Ring Volume
Vibrate Cadence
Ring Delay
Noise Mode
Headset/Speaker
Key Tones
Warning Tones
Push-to-talk*
*Push-to-talk is only available on the SpectraLink 8030 model.
Contact your system administrator if you want to reset all user profiles
back to these default settings.
Silent Vibrate
Off Off
Tone 1 Tone 1
1 1
Off Telephone
0 0
Normal Normal
Speaker Speaker
Off Off
Off Off
Off Off
Ring Settings
and then select
Message Alerts
Soft Loud
Telephone Telephone
Tone 1 Tone 1
3 7
Off Off
0 0
Normal Normal
Speaker Speaker
On On
On On
On On
for text
Custom
Telephone
Tone 1
5
Telephone
5
Normal
Speaker
On
On
On
23