Polycom WX 1500 User Manual page 141

Polycom VVX 1500 Business Media Phone User Guide
You can enter a number between 0 (no sensitivity) and 10 (high sensitivity). The default
sensitivity is 7.
If you set a sensitivity between 1 and 4, you will have to wave your hand at the camera to exit
power-saving mode. As well, power-saving mode may be initiated when you're in your office,
but not close to your phone. (If you enter 0, the user detection feature is disabled and you will
have to press a key on your phone to exit power-saving mode.)

Tap Off Hours Sensitivity, and then enter how sensitive you want the camera to be while
you're not in the office.
You can enter a number between 0 (no sensitivity) and 10 (high sensitivity). The default
sensitivity is 2.
If you set a sensitivity between 1 and 4, you will have to wave your hand at the camera to exit
power-saving mode. As well, power-saving mode may be initiated when you're in your office,
but not close to your phone. (If you enter 0, the user detection feature is disabled and you will
have to press a key on your phone to exit power-saving mode.)
6 Tap the Save soft key.
Polycom, Inc.
Version 5.0.0
141