Using A Headset - Polycom WX 1500 User Manual

Polycom VVX 1500 Business Media Phone User Guide

Using a Headset

If you use a headset, you can set up your phone so that all calls use your headset. You can also use the
hookswitch button on your headset to place, answer, and end calls.
Enabling Headset Memory Mode
Web Info: Supported Headsets
For a list of supported headsets, see
1500 Headset Compatibility
This feature is useful for permanent or full-time headset users. You can set up your phone so that all
incoming and outgoing calls use your headset. At any time, you can switch to handset or speakerphone
mode.
To use Headset Memory Mode, you must enable, and then activate, Headset Memory Mode. If you
switch to handset or speakerphone mode, you deactivate Headset Memory Mode. To switch back to
Headset Memory Mode, you must activate it again.
To enable Headset Memory Mode:
1 Tap
> Settings > Basic > Preferences > Headset > Headset Memory.
2 From the Headset Memory Mode screen, tap Enabled, and then tap the Select soft key.
3 To activate Headset Memory Mode, press
All calls will now go to your headset. If you tap the Line Key with the flashing green status indicator or the
Answer soft key to receive a call, the call will connect to your headset automatically.
If you switch to the speakerphone or the handset, you deactivate Headset Memory Mode (calls no longer
automatically go to your headset, unless you choose this mode). To have calls go to your headset again,
activate Headset Memory Mode by pressing
Polycom, Inc.
Technical Bulletin 37477, SoundPoint IP and Polycom VVX
List.
twice.
twice.
Version 5.0.0
42