Polycom WX 1500 User Manual page 56

Polycom VVX 1500 Business Media Phone User Guide
i. In the Contact field, enter a number to forward all unanswered incoming calls to.
ii. Tap the Forward After Rings field, and then enter how many rings to wait before
forwarding the call (one ring is approximately six seconds). A value of 2 is recommended.
If you selected Busy, enter a number to forward all future incoming calls to when you're already

in another call.
Note: Enter a URL or IP Address
You can also enter a URL or an IP address. For more information on using a URL or an IP address,
Placing Calls
see
4 Tap the Enable soft key to confirm call forwarding.
If you chose to always forward calls, the Line Key displays the forwarding icon,
the Always forwarding type is enabled. If you enabled the Busy or No Answer forwarding type, the Line
Key icon does not change.
The following figure shows Line 2076 with the Always forwarding type enabled.
To disable call forwarding:
1 Do one of the following:

Tap

From the idle screen, tap the Forward soft key.

If your phone is set up with a single line, the Forwarding Type Select screen displays.

If your phone is set up with multiple lines, the Line Select screen displays. Tap the line for which
you want to disable call forwarding. The Forwarding Type Select screen displays.
2 From the Forwarding Type Select screen, tap the forwarding type you want to change, and then tap
the Disable soft key.
Polycom, Inc.
.
> Features > Forward.
Version 5.0.0
, to indicate that
56