Polycom WX 1500 User Manual page 137

Polycom VVX 1500 Business Media Phone User Guide
To change the way the PIP displays:
1 Tap
> Settings > Basic > Video > Local Camera View.
2 From the Local Camera View screen, tap, and then adjust the following settings:

Local Camera View (Full Screen)
Enables or disables the PIP from displaying when you view the near or far site on the full
screen.
To select the setting you want, tap the field, and then tap the field's highlighted box. From the
drop-down list, tap Enabled or Disabled.
The default setting is Enabled.

Local Camera View Mode (Full Screen)
Sets whether you want the PIP to display over or next to full screen video.
You can select these settings:
Side-by-Side—Displays the PIP next to (rather than over) the full screen video.
PIP—Displays the PIP over the full screen video.
The default setting is Side-by-Side.
Note: You Can Remove the Black Sidebars
If you select "PIP," as well as update the way full screen video displays (by choosing "Full" or "Crop"
mode), the full screen video will display on the entire screen (without black sidebars). To choose
"Full" or "Crop" mode, see
To select the setting you want, tap the field, and then tap the field's highlighted box. From the drop-
down list, tap Side-by-Side or PIP.
3 Tap the Save soft key.
Polycom, Inc.
Changing How Non-PIP Video Displays.
Version 5.0.0
137