Fujitsu fi-6000NS Operator's Manual page 77

4. Set the area for multifeed detection in the "Multifeed Detection" section.
Starting from the top edge of a document sheet, set the area to be checked for multifeeds.
Full Multifeeds will be detected within 35mm (1.4in) of the vertical
centerline of the document.
Middle Multifeeds will be detected within "#1" (upper limit) and "#2" (lower
limit) set. (a)
Top & Multifeeds will be detected from the top of the page to "#1" (upper
Bottom limit), and from #2 (lower limit) to the bottom of the page. (b)
3.5 Using the System Settings Menus
35mm
(a)
Up to 510mm
Outside of multifeed
detection area
35mm
Up to 510mm
Outside of multifeed
detection area
Network Scanner fi-6000NS Operator's Guide
#1
#2
Center of paper
(b)
#1
#2
(b)
Center of paper
3
51