Fujitsu fi-6000NS Operator's Manual page 299

Screen
Standby Mode Auto logout time must be shorter than
that for standby mode.
Admin Current password has not been
Password entered.
Invalid current password has been
entered.
New password has not been entered.
Confirm Password has not been
entered.
Password and Confirm Password do
not match.
Passwords must contain at least 7
characters.
IP Address IP Address has not been entered.
Subnet Mask has not been entered.
Default Gateway has not been entered.
IP Address is incomplete.
Subnet Mask is incomplete.
Default Gateway is incomplete.
IP address is invalid.
Subnet mask address is invalid.
Default gateway address is invalid.
Specified IP address is already being
used.
IP Address and Default Gateway must
be different.
Message
Network Scanner fi-6000NS Operator's Guide
Action
Enter a shorter time for auto logout
("Logout after") than for standby
mode ("Standby after").
Enter a current password.
Check the status of the "Caps
Lock" and "Num Lock" indicators,
and re-enter the current password.
Enter a new password.
Enter the same password again in
the Confirmation Password field.
Enter the same password string in
both the New and Confirm
Password fields.
Re-enter a new or confirm
password that contains at least 7
characters.
Enter an IP address.
Enter a subnet mask.
Enter a default gateway.
IP address.
Complete the
subnet mask.
Complete the
default gateway.
Complete the
Enter a valid IP address.
Enter a valid subnet mask address.
Enter a valid default gateway
address.
Enter a different IP address.
Enter an IP address and default
gateway that are different.
C
273