Fujitsu fi-6000NS Operator's Manual page 271

No. Problem
4 In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", [Security]
tab, the security level for the corresponding
zone is set as "high", or in [Custom Level],
"Scripting", "Active Scripting" is set to
"Prompt" or "Disable".
5 The scanner is in standby mode.
6 A proxy server is being used.
This scanner is installed with a LAN card which supports the Wakeup on LAN
HINT
function. If the last time the scanner power was turned off was due to an error or
power failure, the Wakeup on LAN function will not work.
6.3 Network Connection Troubleshooting
If the URL includes a scanner name, the
scanner will be connected using an Intranet
Zone. If the URL includes an IP address, the
scanner will be connected using the Internet
Zone.
In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", try the
following settings for the corresponding zone.
•
To enable "Active Scripting", set in one of
the following ways:
•
In the [Security] tab, set the required
"Security level for this zone" to
"Medium".
•
In the [Security] tab, click the [Custom
Level] button. Then, set the
"Scripting", "Active Scripting" to
"Enable".
•
If connecting via the Internet zone, on the
[Privacy] tab, set the level to below
"Medium High".
After the above settings have been performed,
in "Temporary Internet Files", press the
[Delete Cookies] button to delete all
temporary internet files.
Press the startup button to start the scanner.
Set the proxy server to not be used. Open the
"Internet Options" in the "Tools" menu of
Microsoft® Internet Explorer, then press the
[LAN Settings] button in the [Connections]
tab and remove the check from the "Use a
proxy server for your LAN (These settings will
not apply to dial-up or VPN connections)"
option.
Network Scanner fi-6000NS Operator's Guide
Action
245
6