Fujitsu fi-6000NS Operator's Manual page 298

Screen
Scanner Name
Scanner
Settings
Date/Time
272
Message
The new settings will be enabled after
the system has been restarted. Do you
wish to restart the system now or
later?
Now: Restart the system immediately.
Web-login will not be possible until
the restart completes.
Later: The system will be restarted and
the settings enabled when you logout.
Cancel: Cancel the new settings.
Multifeed detection limit #2 must be
larger than limit #1.
Multifeed detection limit #1 is invalid.
Multifeed detection limit #2 is invalid.
Invalid front side horizontal offset has
been entered.
Invalid reverse side horizontal offset
has been entered.
Invalid front side vertical offset has
been entered.
Invalid reverse side vertical offset has
been entered.
Invalid length magnification
adjustment has been entered.
Date/time setting is invalid.
Time adjustment has caused the
session to timeout. Logging out now.
Action
Press the [Now] button to cause
the system to restart immediately.
Press the [Later] button to delay
the system restart until other
settings are done.
Press the [Cancel] button to cancel
the new settings.
Re-enter a value for "#2" that is
larger than the value for "#1".
Re-enter a value for "#1" that is
between 0 and 510 (mm).
Re-enter a value for "#2" that is
between 0 and 510 (mm).
Re-enter a value for front side
horizontal offset that is between -4
and 4.
Re-enter a value for reverse side
horizontal offset that is between -4
and 4.
Re-enter a value for front side
vertical offset that is between -4
and 4.
Re-enter a value for reverse side
vertical offset that is between -4
and 4.
Re-enter a value for "Length
Magnification" that is between
-3.1 and 3.1 (%).
Re-enter the date/time using only
valid numbers.
No action required.