Fujitsu fi-6000NS Operator's Manual page 303

Screen
Network Specified network folder alias
Folder contains invalid characters.
Specified network folder alias is
already being used. Try a different
alias.
OK to remove this network folder
from the list?
A single user is not allowed to connect
to this network folder from multiple
devices. Close all other connections to
this folder and try again.
Access was refused.
Cannot find the network folder path.
Operation not possible. Network path
is not working.
Not connected to the network.
Too many network connections. To
continue, close any unused network
connections, and try again.
Network is busy. Try again later.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Message
Network Scanner fi-6000NS Operator's Guide
Action
Enter a valid network folder alias
name.
Rename the network folder whose
alias is already being used, and try
adding the folder again.
To remove the network folder,
press the [OK] button.
Otherwise, press the [Cancel]
button.
Close all other connections to this
folder and try again.
Contact a server administrator to
find out if an access permit has
been set.
Contact a server administrator.
Contact a server administrator.
Check that the system network is
functioning normally by
performing a ping test from
another machine in the network,
other than the server with network
folder. If the system network is not
operating correctly, refer to
"Failure to connect to a remote
computer using its IP address"
(page 242) for further solutions.
Close unneeded network
connections, then try opening the
desired network connection again.
Wait for a while, and try again.
Close unneeded network
connections, then try specifying
the desired network path again.
C
277