Fujitsu fi-6000NS Operator's Manual page 113

4. For the target server, select whether to set a server name or IP address.
Both the [Server Name] and [IP Address] buttons cannot be selected at the same time.
5. Enter the target server name or IP addresses (selected in Step 4).
• If the [Server Name] button is selected:
Enter a Fully Qualified Domain Name (FQDN) or server name in the input field. This may
be up to 255 characters long.
• If the [IP Address] button is selected:
Enter a numerical IP address.
3.6 Using the Network Settings Menus
Network Scanner fi-6000NS Operator's Guide
3
87