Fujitsu fi-6000NS Operator's Manual page 327

Screen
Save "Save in:" folder must be specified.
"Save as:" file name must be specified.
"Save as:" filename contains invalid
characters. ( \ / : * ? " < > | ) Try again.
Network is busy. Try again later.
User name or password may be
incorrect.
Cannot find the network folder path.
File already exists. Choose a different
name or change the overwrite
permission setting.
Not connected to the network.
Scan&Buffer job is already queued on
the computer that owns the specified
network folder.
Message
Network Scanner fi-6000NS Operator's Guide
Action
Specify a folder.
Enter a file name.
The following characters cannot
be used.
\ / : * ? " < > |
Re-enter the filename using only
valid characters.
Wait for a while, and try again.
Re-enter the user name and
password.
Contact a server administrator.
Change the file name, or select
[Yes] to overwrite the file with the
same name.
Check that the system network is
functioning normally by
performing a ping test from
another machine in the network,
other than the server with network
folder. If the system network is not
operating correctly, refer to
"Failure to connect to a remote
computer using its server name"
(page 244) for further solutions.
Try the following:
• Select a different network
folder.
• Wait a short time, then try
again.
C
301