Fujitsu fi-6000NS Operator's Manual page 252

4. Press the [Scan] button.
⇒
The scan test starts.
When the scan test has completed, the "Scan Viewer" screen appears.
If the scanner fails to scan correctly, an error message is displayed. For more details
about how to deal with error messages, refer to "C.2 Regular User Messages" (page 291).
5. Check the scanned data.
For more details about "Scan Viewer", refer to "4.9.1 Viewing a Scanned Page" (page
201)" or "4.9.2 Rotating a Scanned Page" (page 202).
6. Press the [OK] button.
⇒
The "Maintenance" screen is shown again.
226