Fujitsu fi-6000NS Operator's Manual page 255

3. Remove the jammed document.
•
ATTENTION
•
4. Holding both sides of the top cover, return it to its original position.
•
ATTENTION
•
old both sides
to close
Staples, paper clips, etc. can cause document jams. Check the
document and feed path, and remove any such objects that may
have come loose.
Any staples, clips, etc. should be removed from the document before
starting a scan.
Take care not to snag the pick springs when removing jammed
documents.
Make sure that the top cover is completely closed. If not completely
closed, document jams and feeding errors may occur.
When closing the top cover, do not slam it shut by pushing the touch
panel as this may damage it.
Network Scanner fi-6000NS Operator's Guide
6.1 Removing Jammed Documents
6
229