Fujitsu fi-6000NS Operator's Manual page 320

Screen
Roller
Cleaning
Delete e-Mail
Address
Delete Fax
Number
Main Menu
Shutdown
Color Mode
294
Message
Scanner top cover is closed. Open the
cover and try again.
Press the [c] key to rotate the rollers.
Once roller cleaning has been
completed, press the [OK] button.
OK to delete the following data?
OK to delete the following data?
Maximum number (10) of
Scan&Buffer jobs already queued,
please wait...
OK to logout now?
OK to shutdown now?
Shutdown will occur after all job
finish. Please wait...
("Black & White" mode is
incompatible with the "JPEG" file
format)
("JPEG" file format + "Auto" color
mode always creates RGB color data)
Action
Open the top cover to clean the
feed rollers, and try again. For
details, refer to "5.2.1 Cleaning the
ADF" (page 211).
Clean the rollers, and then press
the [OK] button.
To delete the data, check the
contents and press the [OK]
button. Otherwise, press the
[Cancel] button.
To delete the data, check the
contents and press the [OK]
button. Otherwise, press the
[Cancel] button.
A maximum of ten jobs may be
buffered. The scanner is busy.
Please wait.
To logout, press the [OK] button.
Otherwise press the [Cancel]
button.
To shutdown the scanner, press the
[OK] button.
Otherwise, press the [Cancel]
button.
Operations cannot be carried out
while the scanner is shutting down.
The scanner will shutdown
automatically. Please wait.
On the "Color Mode" screen,
specify "Auto" or "RGB Color".
For details, refer to "4.7.1 Color
Mode" (page 171).
No action required.