Fujitsu fi-6000NS Operator's Manual page 149

4. Press the [Yes] button.
⇒
After factory default settings have been restored, the scanner is restarted
During factory defaults reset, do not press and hold down the startup
ATTENTION
button for longer than four seconds, as it may cause the scanner to
function abnormally.
After the factory default settings are restored, the scanner name, IP
HINT
address, and other settings will need to be set again, as described in "3.5
Using the System Settings Menus" (page 34).
3.9 Using the Maintenance Menus
Network Scanner fi-6000NS Operator's Guide
3
.
123