Fujitsu fi-6000NS Operator's Manual page 337

Code
12020003 "From" address was rejected by
the server when sending fax.
12020004 "To" address was rejected by
the server when sending fax.
12020005 Fax size exceeded maximum
fax size allowed by the SMTP
server.
12020006 SMTP server connection was
lost while sending fax data.
12020100 Error: fax could not be sent.
12040001 Cannot find the network folder
path.
12040002 Access to network folder was
refused.
Message
Contact a system administrator to check
that the specified e-mail source address is
authorized for use on the server.
Contact a system administrator to check
that the specified e-mail destination
address is authorized for use on the server.
Contact a system administrator to check
the "Maximum Attachment Size" setting.
"3.6.6 Setting the e-Mail Server (SMTP
Server)" (page 69)
Try the following:
• Check that the LAN cable of the scanner
• Contact a system administrator to check
• Contact a system administrator to check
• Contact a system administrator to check
Contact a system administrator to check if
sending fax is allowed.
Try the following:
• Check that the LAN cable of the scanner
• Check that the file server is working
• Contact a system administrator to check
Contact a system administrator to check
whether or not access to the network folder
is permitted for the currently logged in user
or authenticated user.
Network Scanner fi-6000NS Operator's Guide
Action
and SMTP server is connected properly.
that then scanner IP address and SMTP
server settings are correct.
"6.3 Network Connection
Troubleshooting" (page 234)
that the SMTP server is working
properly.
the maximum e-mail size allowed by
the SMTP server.
and file server is connected properly.
properly.
that the scanner IP address and network
folder settings are correct.
"6.3 Network Connection
Troubleshooting" (page 234)
C
311